Generally occurring in vertical equipment reducer, mainly related to the amount of lubricating oil and oil varieties. When vertical equipment is used, it is very simple to constitute the lack of lubricating oil. When the reducer is interrupted, the transmission gear oil between the motor and the reducer is lost, and the gear can not get proper lubrication protection. When hard gear reducer is started, the gear can not get useful lubrication, leading to mechanical wear and damage.

Ensure the quality of equipment

Can buy or configure some special things, disassemble and equipment reducer parts, try to prevent hammer and other things knock; When replacing gear, worm gear and worm, try to choose original parts and replace them in pairs; Equipment output shaft, to pay attention to service collaboration; To use anti-stick agent or red lead oil to protect the hollow shaft, to prevent wear and rust or collaborative area scale, difficult to disassemble when repairing.

Lubricating oil selection

Helical gears - worm gear and worm reducer generally use 220 # gear oil, on the operation of heavy load, start again and again, poor environment of reducer, can choose some lubricating oil additive, make the reducer gear oil in intermittent operation still adhere to the surface of gear, form protective membrane, prevent the heavy load, low speed, high torque and direct touch between the metal when it is started. The additive contains sealing ring regulator and anti-leakage agent, so that the sealing ring remains soft and elastic, useful to reduce lubricating oil leakage.

Worm bearing damaged

When the problem occurs, even if the reducer is well sealed, it is often found that the gear oil in the reducer is emulsified, and the bearing is rusted, corroded and damaged. This is because after the reducer works for a period of time, the condensate water and water are mixed after the temperature of gear oil rises and cools. Of course, it is also closely related to bearing quality and equipment process.